JamieCole Posted April 12, 2023 Report Share Posted April 12, 2023 IMG_0107.mov My hot tub is pausing like this. This is on the jet full blast. Hey 2 is working fine, just jet 1. Nothing obviously wrong with the filter (unless I need to just change it?) and the water level is usually this height. What could be causing it IMG_0107.mov Quote Link to comment Share on other sites More sharing options...
cranbiz Posted April 12, 2023 Report Share Posted April 12, 2023 Attachments unavailable. Quote Link to comment Share on other sites More sharing options...
JamieCole Posted April 12, 2023 Author Report Share Posted April 12, 2023 Trying again here IMG_0107.mov Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted April 12, 2023 Report Share Posted April 12, 2023 This attachment is not available. It may have been removed or the person who shared it may not have permission to share it to this location. Quote Link to comment Share on other sites More sharing options...
JamieCole Posted April 12, 2023 Author Report Share Posted April 12, 2023 Ah right sorry. They are playing for me. Seems like I can’t post a YouTube link either. Do you know if there’s a website that is accepted that I can post? Quote Link to comment Share on other sites More sharing options...
castletonia Posted April 12, 2023 Report Share Posted April 12, 2023 It looks and sounds like the pump is surging because it is not getting enough water. Assuming the water level is high enough, try running without the filter. A dirty filter will restrict water flow and can cause this. Some of the Coast Spas also had a separate skimmer basket that is separate from the filter. If you have that that check to make sure there is nothing in it that could restrict water flow. 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.