kriegmeister Posted August 29, 2021 Report Share Posted August 29, 2021 I'm having a heck of a time identifying this control panel to figure out how to enter programming mode. I don't think it's a TP600, as there's a mode button and the light button is on the opposite side of the temp control buttons. When I press a temp control button, the LCD does not blink to enter programming mode. I've tried pressing and holding the mode button, and various combinations, to no avail. I'd prefer to avoid removing the overlay pull the retaining screws. So far I've been able to view the back from inside the Looking at the back, I can make out that it says Balboa 22025 printed on the back of the circuit board, but searching that has not provided results. Can someone please ID this unit and point me to the user manual? The spa is dates to about 2010, and was purchased in Canada. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted August 29, 2021 Report Share Posted August 29, 2021 Need to see pack to identify correct panel. In Canada contact https://www.poolandhottubdepot.com/balboa/ 1 Quote Link to comment Share on other sites More sharing options...
kriegmeister Posted August 29, 2021 Author Report Share Posted August 29, 2021 I finally found it. Google lens spit it out right away. It's a VL600. Gotta admit, Google's AI is pretty impressive. Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted August 29, 2021 Report Share Posted August 29, 2021 1 hour ago, kriegmeister said: AI is pretty impressive. "Scary" is the term I would use... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.