sasq40 Posted August 26, 2015 Report Share Posted August 26, 2015 So i'm getting ready to refire my old tub for the fall, had it drained all summer. I knew last year i was having a problem with the pressure switch so i replaced that. So filled up the tub and flipped my breakers and nothing. No clicking, no pumping, nothing in the top display. I checked for power and was getting 240 and checked the fuse and was getting continuity. Worked great all last winter.Its a old artic spa with a Balboa Circuit Board, Duplex Digital, 54003. Any tips to get it working again are appreciated Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted August 27, 2015 Report Share Posted August 27, 2015 Which fuse, the large ceramic one, or the small glass one? Make sure you test both. Quote Link to comment Share on other sites More sharing options...
sasq40 Posted September 12, 2015 Author Report Share Posted September 12, 2015 There's about 4 fuse in total and all test good using continuity test on my meter Quote Link to comment Share on other sites More sharing options...
postie1686 Posted September 14, 2015 Report Share Posted September 14, 2015 mine did the same thing last year. i had to replace the little transformer. but idk if yours has that! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.