drewskie Posted January 24, 2014 Report Share Posted January 24, 2014 Hey again. I had posted recently about my 2001 Altamar having issues. I changed the heater out, and just replaced the circulation pump. The tub worked for a few days, but now I get a solid flo error. The problem is, the circ pump is working jut fine, and the flow switch is in the closed position. If I turn power off to the tub, and turn it back on, it works for little while then goes back to the flo error. Any ideas what this could be? All the recent issues coming up at the same time makes me worried it could be the circuit board. Thanks again in advance. Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted January 25, 2014 Report Share Posted January 25, 2014 Is the flow switch in the closed position when the pump is *not* on? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.