Aaron-99-1999 Posted October 27, 2009 Report Posted October 27, 2009 Its busted up. I drained the pool to expose it and its got 2 wires going into it. It threads into a pump return in the main part of my pool. Guessing its a temp sensor? I need to replace. Plastic was all broken Thanks Aaron Quote
Pool Clown Posted October 27, 2009 Report Posted October 27, 2009 Says link is broken, can you repost the pic? Quote
Aaron-99-1999 Posted October 27, 2009 Author Report Posted October 27, 2009 Says link is broken, can you repost the pic? OK, I fixed the pic. Sorry, take another look Quote
Pool Clown Posted October 28, 2009 Report Posted October 28, 2009 You got me. Someone will know. Quote
idnmadt Posted October 29, 2009 Report Posted October 29, 2009 Its some type of chlorine generator. I would remove all components of it and replace it with a more well known brand where the cell will be at the equipment. Quote
Pathfinder Posted October 29, 2009 Report Posted October 29, 2009 Im gonna say its some sort of copper system as those plates look to be copper. If so disassemble & go with something else. Its definitely something I havent seen in 12 yrs of pool work Quote
quantumchromodynamics Posted October 30, 2009 Report Posted October 30, 2009 I have never seen one of those. Is there any writing on it anywhere? Quote
Aaron-99-1999 Posted October 30, 2009 Author Report Posted October 30, 2009 THANKS! I think you're right! I looked and there is an abandon Pure and Clear Controller for Salt water, I traced the wires from the controller to the pool return line, which has wires going into the PVC line near the pump. Since this system has been off-line, I'll cut the wires and put in a normal return. Appreciate the support for a new pool owner. Aaron Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.