kklis64 Posted April 3 Report Share Posted April 3 Hello, My Sundance displays a blank screen. I attached a video of the screen while turning on power, and at 18-20 seconds it flashes 108 deg then 104 deg quickly before a few dash marks then blank. Is this a Sundance code that can help me diagnose my problem of no display or spa operation? IMG_2197.mov Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted April 3 Report Share Posted April 3 Video unavailable. Might find some information here: http://jacuzzipartners.com/knowledgelibrary/assets/pdf/681.pdf first remove filters for testing. Remove them from the equation. I would test all fuses I would be looking at the sensors if fuses all good. There is a sensor recall by Sundance/Jacuzzi. What year/month was your spa made? https://www.jacuzzi.com/en-ca/recall.html Quote Link to comment Share on other sites More sharing options...
kklis64 Posted April 3 Author Report Share Posted April 3 Thank you for the link to the manual — appears very helpful. The year is 2002. Put in a cleaned filter, all fuses had no resistance when removed, put in a cheap eBay temp sensor and found the limit sensor loose so re-glued into place. Will follow the manual steps carefully in the next day or two. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.