jmelgar23 Posted July 31, 2023 Report Share Posted July 31, 2023 PLEASE HELP! Recently purchased a home with a spill over spa into pool. Can’t find the make or model anywhere. Need to replace the spa controls. The spa itself works. Controls need to be replaced. I have not been able to contact the owner that installed the pool and spa years ago hence why I am here hoping someone can help. Attached below are a few photos of the spa and control. Thank you! Quote Link to comment Share on other sites More sharing options...
cranbiz Posted August 1, 2023 Report Share Posted August 1, 2023 Can you get a picture of the control box under the spa? As well as the wiring diagram on the back of the cover. This will tell us the controls manufacturer and the model of the controls. It's going to be something like this one but don't order this until we know who made your control box. https://www.wildwestpoolsupplies.com/hydroquip-4-button-control-panel-with-temperature-readout-34-0037d-s/?wi=off&gclid=Cj0KCQjw2qKmBhCfARIsAFy8buL8VeKK305VnFz320MxBUrsuOqVGoLRWR79Y05RVFJn5ydSKQbuIR8aAoloEALw_wcB 1 Quote Link to comment Share on other sites More sharing options...
jmelgar23 Posted August 2, 2023 Author Report Share Posted August 2, 2023 10 hours ago, cranbiz said: Can you get a picture of the control box under the spa? As well as the wiring diagram on the back of the cover. This will tell us the controls manufacturer and the model of the controls. It's going to be something like this one but don't order this until we know who made your control box. https://www.wildwestpoolsupplies.com/hydroquip-4-button-control-panel-with-temperature-readout-34-0037d-s/?wi=off&gclid=Cj0KCQjw2qKmBhCfARIsAFy8buL8VeKK305VnFz320MxBUrsuOqVGoLRWR79Y05RVFJn5ydSKQbuIR8aAoloEALw_wcB Hello, I appreciate your response! I have attached a picture of the back of the control panel. The only thing I can find is “59911 07/27/06”. Tried Google and can’t find anything online. There is no diagram or model on the control unfortunately. Also, I can’t access underneath the spa either as it is underground beneath the pavers. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted August 2, 2023 Report Share Posted August 2, 2023 You are going to have to access the main control box to replace it so might as well remove the pavers and get the information requested to help you unless the topside wiring goes all the way to the pool room and the control box is located there. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.