nickrides Posted April 21, 2023 Report Share Posted April 21, 2023 Gents Nwebie here.archive (3).zip I left for 2 weeks and came back and my above spa had no heat and was a bit frozen. 1/16 inch of Ice on top, circ pump not running. I drained it and sucked all the water out with a shopvac through the jets. The Circ pump had Ice in it. I took it out, thawed it out and plugged it in and turned on the power for a minute and it runs. So I think it may be the heater. See attached pics please. How do I check it and if bad where can I buy one? Why would the circ pump shut off if it's running now? Sorry for all the pictures, I can't see on my end what's there Nick archive (2).zip archive (1).zip archive (1).zip archive (3).zip Quote Link to comment Share on other sites More sharing options...
nickrides Posted April 23, 2023 Author Report Share Posted April 23, 2023 Bump Nick Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted April 23, 2023 Report Share Posted April 23, 2023 Pics unavailable Quote Link to comment Share on other sites More sharing options...
nickrides Posted April 27, 2023 Author Report Share Posted April 27, 2023 Ok The weathers been bad so haven't touched it But I'm going to refill it soon and see if it fires off I ohmed out the heater seems OK The circ pump runs Nick Quote Link to comment Share on other sites More sharing options...
nickrides Posted April 27, 2023 Author Report Share Posted April 27, 2023 Another picture Nick Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted April 27, 2023 Report Share Posted April 27, 2023 Is there 3 dots flashing on the topside display? Here is a service manual. https://www.geckodepot.com/fichiers/documentsProduits/GDA/en/Serv_Man_M_CLASS_EN.pdf The manual shows a pressure switch but your spa likely has a flow switch located left of the blue foam around the heater tube and looks like this... Let us know if you have the 3 dots flashing or not and we can go from there Quote Link to comment Share on other sites More sharing options...
nickrides Posted April 27, 2023 Author Report Share Posted April 27, 2023 Yes I had the 3 dots flashing Nick Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted April 27, 2023 Report Share Posted April 27, 2023 Ok, 3 dots flashing... bad flow switch, Dirty filters, Low water level, To many closed jets. Circulation related pump not moving water or working. See manual I linked for 3 dots flashing Quote Link to comment Share on other sites More sharing options...
nickrides Posted May 1, 2023 Author Report Share Posted May 1, 2023 CST Thanks for that ! I Think I got it fixed. The wire from the flow sensor was damaged and I cut it out and Now it seems to work Temp is coming up and no flashing lights Whahoo Nick 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.