Jump to content

nickrides

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by nickrides

  1. CST Thanks for the response! I did not know you could just purchase a new skin. Nick
  2. Friends I've got a brand new brown Naugahyde like cover. A roofer dropped a piece of metal on it and put about a 1" tear and dent in it. Any advice on how to fix it? He has no insurance TIA Nick
  3. I ordered a new pump Will confirm this was the problem Nick
  4. Gents Went away for a few days and when I got back my spa had tripped the main breaker in the panel. I pulled the plugs one by one to the 2 jet pumps, ozinator and recirc pump and when I pulled the recirc pump plug the breaker would hold with the control panel on and flashing. Has my recirc pump likely gone bad? It has 2 round prongs and a flat prong on the plug Can I test it by ohming it out? What else? Thanks in advance as always! Nick
  5. I'd get a shopvac and set it up to suck and then put the suction hose on each jet under you feel it running dry Nick
  6. OK Thanks for that CST Nick
  7. Gents I switched from Clorine to Bromine and like it . Then I saw a blurb about Bromine being banned in Canada due to some issue. Is this true or internet BS? Thanks in Advance Nick
  8. Gents Newbie here As the title sez, what's the best way to clean my filters? Thank in advance Nick
  9. CST Thanks for that ! I Think I got it fixed. The wire from the flow sensor was damaged and I cut it out and Now it seems to work Temp is coming up and no flashing lights Whahoo Nick
  10. Ok The weathers been bad so haven't touched it But I'm going to refill it soon and see if it fires off I ohmed out the heater seems OK The circ pump runs Nick
  11. Gents Nwebie here.archive (3).zip I left for 2 weeks and came back and my above spa had no heat and was a bit frozen. 1/16 inch of Ice on top, circ pump not running. I drained it and sucked all the water out with a shopvac through the jets. The Circ pump had Ice in it. I took it out, thawed it out and plugged it in and turned on the power for a minute and it runs. So I think it may be the heater. See attached pics please. How do I check it and if bad where can I buy one? Why would the circ pump shut off if it's running now? Sorry for all the pictures, I can't see on my end what's there Nick archive (2).zip archive (1).zip archive (1).zip archive (3).zip
  12. Maybe it's just me but i wouldn't rip anybody a new A$$hole. They didn't package anything, they just sold it.
  13. CSP Thanks to you I got it fixed. Spa care sent me 3 wrong controllers, but I finally got the correct one, the one you speced and it plugged right in and worked! Thank you !! Nick
  14. CST I ordered the top controller When I get it installed I'll let you know what happens Thank YOU! Nick
  15. CST It looks after closer inspection my tub is a '03 here are some pictures The one with my thumb in it the connector is above my thumb The one where there is a loose old hose on the left, what might that be too! Thank you! Nick
  16. CST Thank you I will get a photo up tomorrow! Nick
  17. CST Whats the Spa Pack? The Main power box with the boards? Where the 220v hooks in? Nick
  18. CSP Heres is a photo of the back of my controller Is this compatible with the link you sent me for that one for $149? Thanks for your interest! Nixk
×
×
  • Create New...