nickrides

CST Thanks for the response! I did not know you could just purchase a new skin. Nick

Friends I've got a brand new brown Naugahyde like cover. A roofer dropped a piece of metal on it and put about a 1" tear and dent in it. Any advice on how to fix it? He has no insurance TIA Nick

A New circ pump fixed it Nick

I ordered a new pump Will confirm this was the problem Nick

Gents Went away for a few days and when I got back my spa had tripped the main breaker in the panel. I pulled the plugs one by one to the 2 jet pumps, ozinator and recirc pump and when I pulled the recirc pump plug the breaker would hold with the control panel on and flashing. Has my recirc pump likely gone bad? It has 2 round prongs and a flat prong on the plug Can I test it by ohming it out? What else? Thanks in advance as always! Nick

I'd get a shopvac and set it up to suck and then put the suction hose on each jet under you feel it running dry Nick

OK Thanks for that CST Nick

Gents I switched from Clorine to Bromine and like it . Then I saw a blurb about Bromine being banned in Canada due to some issue. Is this true or internet BS? Thanks in Advance Nick

Thank you for the bets CST Nick

Gents Newbie here As the title sez, what's the best way to clean my filters? Thank in advance Nick

CST Thanks for that ! I Think I got it fixed. The wire from the flow sensor was damaged and I cut it out and Now it seems to work Temp is coming up and no flashing lights Whahoo Nick

Yes I had the 3 dots flashing Nick

Another picture Nick

Ok The weathers been bad so haven't touched it But I'm going to refill it soon and see if it fires off I ohmed out the heater seems OK The circ pump runs Nick

Bump Nick