RoyVV Posted February 5, 2022 Report Share Posted February 5, 2022 I can't find an installation manual to install this thing anywhere online. I figure I can just connect it--electrically speaking--to where an ozone system would connect if I had one on my control board (0.5A, 120V). The ballast box on the Clear Ray sytem says "Input: 120Vac, 0.33A". Plumbing wise, I'm going to splice into the tubing coming out of the heater unit. Sound reasonable? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted February 5, 2022 Report Share Posted February 5, 2022 has 4 or 5 videos on his page, I did not watch so... 1 Quote Link to comment Share on other sites More sharing options...
RoyVV Posted February 5, 2022 Author Report Share Posted February 5, 2022 i swear this never came up in any of my searches...wierd. i'll check them out. thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.