Sir Lancaster Posted August 28, 2021 Report Share Posted August 28, 2021 Hi. My Freeflow Cascina hot tub started to have issues with the LED display screen. It seems that some of the segments of the LED screen are not working. See the attached picture. It should display 34.5. Otherwise everything works fine. How can I fix it? Where can I get a replacement part? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted August 29, 2021 Report Share Posted August 29, 2021 The topside is made by Gecko Alliance but likely proprietary to Freeflow. Post pics of the spa pack and schematic on the inside cover if there is one. The Gecko IN.K330 is close but can't say it would work without seeing the pack. https://geckokeypads.com/ink330overview Quote Link to comment Share on other sites More sharing options...
Sir Lancaster Posted August 29, 2021 Author Report Share Posted August 29, 2021 Hi @CanadianSpaTech, thanks for your response. The equipment is definitely made by Gecko. Attached is a picture of the brains of the spa and also of the keypad/screen. I found that this company sells the replacement part, but I'm worried that exactly the same part will last exactly the same time, which was just a little over a year. https://www.hottubspasupplies.com/catalog/product/view/id/36180/s/78453-freeflow-topside-4-button-no-overlay-1/category/2/ Perhaps I should replace it with a newer, revised, but compatible keypad/screen from Gecko? Is that possible? Also, would it be possible just to replace the LCD portion? Your help is appreciated! Quote Link to comment Share on other sites More sharing options...
Sir Lancaster Posted August 29, 2021 Author Report Share Posted August 29, 2021 It looks like this one: https://www.yseries.ca/overview-yj/ Only that mine says v2 and this one is v3. I wonder if any of those 2 keypads would work on mine because I don't feel very comfortable going with the same keypad that did not last much. I also checked the connector from the brains to the keypad and it seems fine, clean, etc. Disconnecting it a few times and reconnecting it did not have any effect. Now, what if it is not the keypad but something bad in the brains? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.