Matedav56 Posted October 12, 2020 Report Share Posted October 12, 2020 All lights are on, but the temp shows as "00" and none of the buttons work. The water is super hot (maybe 105-106°. Too hot to be comfortable. Any advice? Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted October 13, 2020 Report Share Posted October 13, 2020 Unplug it until you figure it out. I have no real experience with these in particular, but I would suspect there is some issue with the temp sensor or perhaps circuit board. Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted October 13, 2020 Report Share Posted October 13, 2020 Is there a lock? below clipped from Softub website but does not give any additional information that I can see. Check your manual for reset information. "The combination is preset to ‘00’ and is easily reset with the enclosed instructions." Quote Link to comment Share on other sites More sharing options...
Matedav56 Posted October 13, 2020 Author Report Share Posted October 13, 2020 8 hours ago, CanadianSpaTech said: Is there a lock? below clipped from Softub website but does not give any additional information that I can see. Check your manual for reset information. "The combination is preset to ‘00’ and is easily reset with the enclosed instructions." This is referring to the combination locks on the tub cover. Thanks for responding! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.