Say578 Posted February 24, 2020 Report Share Posted February 24, 2020 Hi all apologise if this has already been covered or if I’m in the wrong forum, please reply with link if so I have a Coleman spa (not inflatable type) I don’t know year or model number it use to heat to 40 degrees no problem, but last few days temperature dropped to 30 and won’t climb ! ive changed the filter, still no change even ran it for 2 hours with no filter ( I know not suppose to but wanted to eliminate everything) run the jets for a bit, still no change what am I missing ? thank you in advance Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted February 25, 2020 Report Share Posted February 25, 2020 Leave the filters out until you find the issue. Are there any error codes? Is the heat indicator light on? Are you in standard mode? I would open the spa pack and look for any burn marks around the heater relays Quote Link to comment Share on other sites More sharing options...
Say578 Posted February 25, 2020 Author Report Share Posted February 25, 2020 No error codes, heating light was on, but with further investigation after turning off the power and removing the heating control panel I could see one of the heating element lugs was badly corroded and when touched came apart from the element completely new element ordered hopefully this will solve the problem Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted February 26, 2020 Report Share Posted February 26, 2020 Sounds like you are on the right track. Let us know results. Good Luck Quote Link to comment Share on other sites More sharing options...
Say578 Posted March 1, 2020 Author Report Share Posted March 1, 2020 Hi all, Update on my post, new heating element fitted, also fitted new seals and cleaned the temperature sensors got to 40 degrees very quick and family all enjoying the spa once again thank you CanadianSpaTech for your replies Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted March 1, 2020 Report Share Posted March 1, 2020 Enjoy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.