jgraves Posted June 7, 2015 Report Posted June 7, 2015 Hello. I think my pressure switch is bad and am going to replace it. On my hot tub the pressure switch is pointed toward the back of the tub and looks inaccessible without being able to remove the heater tube. The tube and control panel are all contained in a plastic liner which makes access difficult. Can anybody offer any suggestions? THanks. Jeff Quote
jgraves Posted June 7, 2015 Author Report Posted June 7, 2015 I ended up having to remove the entire spa pack. Not terribly difficult but certainly not what I had on tap for today. Quote
Dr. Spa Posted June 8, 2015 Report Posted June 8, 2015 Probably not. A good spa tech would most likely just reach in, unscrew it, and screw in a new one. Somewhat blindly. Tough to say though, without a picture Quote
jgraves Posted June 8, 2015 Author Report Posted June 8, 2015 What PSI should my new switch be set for? My tub has a 24-hour circulation pump. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.