cp1 Posted July 10, 2011 Report Share Posted July 10, 2011 Hello all, great forum ! I have an LX250 heater and I opened her up tonight and these two white wires were just hanging there, The must have come loose from somewhere. Can someone advise where they go? Thanks ... I have attached pics. Quote Link to comment Share on other sites More sharing options...
PoolGuyNJ Posted July 10, 2011 Report Share Posted July 10, 2011 It looks like you toasted the igniter wires, if they are cloth covered, Scott Quote Link to comment Share on other sites More sharing options...
cp1 Posted July 11, 2011 Author Report Share Posted July 11, 2011 It looks like you toasted the igniter wires, if they are cloth covered, Scott Is there any way to re-connect them? where do they connect? I've spent hours looking and cant find where they were connected to .... Quote Link to comment Share on other sites More sharing options...
PoolGuyNJ Posted July 11, 2011 Report Share Posted July 11, 2011 Time for a new one. The burner tray has to be pulled to get at the old one. The new one will have leads that reach from the igniter, which is at the back of the burner tray, through a channel to the front lead connections. Scott Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.