razoo125 Posted February 23, 2010 Report Share Posted February 23, 2010 I am getting juice coming from the board going to the ozone, but I am not sure its working. How can I tell if it is operating? Quote Link to comment Share on other sites More sharing options...
ps558 Posted February 23, 2010 Report Share Posted February 23, 2010 I am getting juice coming from the board going to the ozone, but I am not sure its working. How can I tell if it is operating? Must of them have a glowing look when they are operating. If it is over a year old its probably shot Quote Link to comment Share on other sites More sharing options...
JerimiahR Posted February 24, 2010 Report Share Posted February 24, 2010 I am getting juice coming from the board going to the ozone, but I am not sure its working. How can I tell if it is operating? Must of them have a glowing look when they are operating. If it is over a year old its probably shot Depends on the type of ozone. Not all of them are shot after a year (CD-Cell for instance). If it's UV or CD-Chip type those usually are about a year or so. There are specialty ozone test kits you can use to see if you have adequate ozone output. http://www.waterquality.net/en/spa-ozone-detection/ Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.