mudrider Posted September 11, 2008 Report Share Posted September 11, 2008 my shell has no foam on it. got it like that. what do you suggest to use to insulate the shell and not being destroyed by consendation(sp?)?? i am in the process of rehabbing/rebuilding my spa and i would like some recommendations. Quote Link to comment Share on other sites More sharing options...
ChicagoMike Posted September 12, 2008 Report Share Posted September 12, 2008 Got any pictures? What are the side panels like? You can add sheet foam or whatever to the side panels and keep the heat in there or try to insulate the tub shell and keep the heat in there. Or I guess both. Quote Link to comment Share on other sites More sharing options...
mudrider Posted September 13, 2008 Author Report Share Posted September 13, 2008 side panels has no insulation either. i was trying to figure out how to attach the sheet to the tub with rounded sides. i am also thinking about rebuilding the frame. is there a particular thickness i should use? Quote Link to comment Share on other sites More sharing options...
Peter Smit Posted September 13, 2008 Report Share Posted September 13, 2008 side panels has no insulation either. i was trying to figure out how to attach the sheet to the tub with rounded sides. i am also thinking about rebuilding the frame. is there a particular thickness i should use? Have a look at the tips here: http://www.poolspaforum.com/forum/index.php?showtopic=13095. Regarding thickness: As thick as possible... especially if the outside temp is a lot lower than the 100 degrees in the tub. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.