Bsimms89 Posted March 13 Report Share Posted March 13 I have a 2013 artesian spa grand bahama hot tub. My topside panel display has been wearing out and I feel like it’s on borrowed time, from what I’ve read their panel is basically a balboa tp800 with different overlay, it looks like this: https://www.hottuboutpost.com/artesian-spa-control-panel-tp800-33-1314-08-2-pump-3-pump/ even though it has a larger plastic surround the hole is the same as the tp800. I figured since I have to change the panel anyway I might as well upgrade while I’m at it and was considering installing a balboa spatouch 3. The main issue I’m seeing is the hole already in the spa is wider than needed the tp800 hole is 8.88” wide (https://www.balboawatergroup.com/getdoc.cfm?id=1367) the spatouch 3 hole is only 5” wide (https://www.balboawatergroup.com/getdoc.cfm?id=2457) What would be the best way to fill in the opening? I figured I could get some sort of plate and silicone that to the shell of the tub, then cut the new hole into that, but what material should I use. I’m curious what others have done or what people feel would be the best option? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted March 13 Report Share Posted March 13 There are adaptor plates available in several different sizes: https://spadepot.com/products/spa-topside-control-adapter-plate-3-3-4-inch-hq0089 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.