jr82 Posted March 7, 2023 Report Share Posted March 7, 2023 I have a Jacuzzi J-355 model hot tub. It's about 5 years old. I've been getting a Flow 2 error code - I replaced the filters and adjusted jets once to fix it. Its back on again... I adjusted the jets again to try and augment the flow but it didn't work. I bought a new switch to replace the old on but I can't find it on the hot tub. The flow switch from the circuit board seems to go directly into a metal casing behind the control box that I assume is the heater. Do I need to take this apart? Quote Link to comment Share on other sites More sharing options...
CanadianSpaTech Posted March 10, 2023 Report Share Posted March 10, 2023 Is it a flow switch or a pressure switch? Sounds like a pressure switch that screws into the heater tube. You will likely have to drain the spa to change it as there are no gate/slice valves in a Jacuzzi to block the water flow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.