BuddyHolly Posted January 4, 2023 Report Share Posted January 4, 2023 I have done too many to name repairs and replacements on our 99 Sundance Cameo. Recently there was no power to the top side controller(6600-803) so I flipped the circuit breaker off and on, and there was power to the top side. This didn’t last long, though. I was still getting power to the spa itself, but nothing to the top side. After turning the power off I pried the controller off to see it had been burned out(photo enclosed). Everything looks right on the main circuit board, so I’m hesitant to purchase a new top side controller before hopefully getting more advice. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
In Hot Water Posted January 5, 2023 Report Share Posted January 5, 2023 Short of disconnecting any remote controls (in the back), Replacing board and spa side is the next step. Quote Link to comment Share on other sites More sharing options...
cranbiz Posted January 5, 2023 Report Share Posted January 5, 2023 That looks more like age discoloration than burned up. I have no doubt that something in the top side has failed but I don't think it actually burned up. 24 years of living in a hot, damp environment, that discoloration I would expect. I suspect if you can find a replacement top side, you will be back in full operation. Quote Link to comment Share on other sites More sharing options...
BuddyHolly Posted January 6, 2023 Author Report Share Posted January 6, 2023 Thank you for the responses. In the photo it looks like some discoloration, but when seeing in person it looks like a slight burn near the sticker. New, or hopefully used, top side controller is a must. I’ll take off the circuit board tomorrow, and see if a local electronics repair shop can repair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.