JKM Posted December 29, 2015 Report Share Posted December 29, 2015 I have a Hotspring Sovreign that I bought back in 2007 Recently, it developed a leak around the light lens at the back of the equipment compartment I need to know if I need to replace the whole assembly or just the lens. It's leaking at the bottom of the back of the light assembly. Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted December 29, 2015 Report Share Posted December 29, 2015 Just the lens, It comes with a new O-ring. Part number 71830 Quote Link to comment Share on other sites More sharing options...
JKM Posted December 31, 2015 Author Report Share Posted December 31, 2015 Thanks. I'll get one ordered. Quote Link to comment Share on other sites More sharing options...
JKM Posted December 31, 2015 Author Report Share Posted December 31, 2015 I got the part ordered. BTW, I looked up my spa using the serial number. It's a 2004 model (I1F1429). After looking through the forum archives. it looks like this is a weak area on Hotspring spas in general. I'm glad I didn't have to dig through the insulation to find this one. I have the lens ordered. Do you have any instructions on how to replace the old lens with the new one? I'm assuming I won't have to use any Devcon epoxy in this fix. Thanks. -Joel Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted December 31, 2015 Report Share Posted December 31, 2015 No epoxy needed, its a snap. Just unscrew the escutcheon cover, then you'll have access to the lens. Just uncsrew it. Lefty loosey, righty tighty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.