Jump to content

Im Stumped....


SigSauer417
 Share

Recommended Posts

Hello all,

I have never posted here and just thought I would give you all a try at helping me figure out whats going on with my hot tub....

We recently bought a house with a hot tub already in it. The hot tub was up and running when we bought it. I drained, cleaned and filled it and it ran perfect for about 2 months. One day I noticed the temp was at 100 and would not reach the 103 setting that I had it at. Thinking it was a flow issue, I changed the filter and it heated right back up and ran perfect for about 2 more weeks. It again dropped temp, but this time to 102 and would continually run at 102 and never turn off (trying to reach the 102 setting) . I bought a new filter and changed it with no luck as it still ran continually.

I did a bit of research and changed both temp probes thinking they were sending a false temp reading. After I drained it, changed the probs, re-filled it it heated up to my 103 setting and turned off.

The next day, the temp is again at 102 and runs continually trying to reach 103.

I decided to pull the filter out and see if it was again a bad filter.... it ran at 102 for 2 hours continually and never reached 103.

Im not sure what else is going on... anyone else have the same issue?

Its a 2004 Colman Maxx Spa, 631 series.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...