Bugman1400 Posted November 13, 2011 Report Share Posted November 13, 2011 Does anybody have the instructions for the Jandy 7790 Temp Sensor? Also, how about the resistance chart? Mucho grassyass! Quote Link to comment Share on other sites More sharing options...
PoolGuyNJ Posted November 13, 2011 Report Share Posted November 13, 2011 New: Drill 3/8" hole in the pipe between the pump and filter and clamp in place. Run the cord into the low voltage raceway and secure its path to the existing conduits as needed. Connect it to the appropriate terminals. Its a 10K thermistor but I don't remember the rise and fall rates compared to the temp. Scott Quote Link to comment Share on other sites More sharing options...
Bugman1400 Posted November 13, 2011 Author Report Share Posted November 13, 2011 New: Drill 3/8" hole in the pipe between the pump and filter and clamp in place. Run the cord into the low voltage raceway and secure its path to the existing conduits as needed. Connect it to the appropriate terminals. Its a 10K thermistor but I don't remember the rise and fall rates compared to the temp. Scott The drill hole size is what I needed most. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.