Mark and Lee Ann Posted June 2, 2011 Report Share Posted June 2, 2011 We got a Jacuzzi J375 free from a friend who cleans foreclosed homes. It appears to be in good condition except for the sides being missing, the ozone injector is missing and the T that the flow switch screws into is missing. We would love to see a photo or diagram of what the control area is supposed to look like when all hooked up and ready to go. We are in the process of removing our old hot tub which is not working and then putting this one in its place. Can anyone help or have suggestions? Thanks for you ideas and help. Quote Link to comment Share on other sites More sharing options...
THE SPA GUY Posted June 2, 2011 Report Share Posted June 2, 2011 I would look up the local Jacuzzi dealer in your city, tell them what you have, they can point you with what you need . Quote Link to comment Share on other sites More sharing options...
Mark and Lee Ann Posted June 2, 2011 Author Report Share Posted June 2, 2011 I would look up the local Jacuzzi dealer in your city, tell them what you have, they can point you with what you need . Thanks, but we have already tried that. No help. Quote Link to comment Share on other sites More sharing options...
jframe Posted March 26, 2016 Report Share Posted March 26, 2016 Hi there, I know it's not likely that you will be seeing that, but saw your thread and was wondering whether you were able to get all the tubes and T straightened out on on j375. We just purchased a 2004 J375 as well, and it has the same issue with the T and the tubing. Thanks! Jordan Frame Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.