docsteph Posted November 6, 2010 Report Share Posted November 6, 2010 Aloha: We have had our hot tub purchased from Costco for about a year. It has been working fine until now. We were filling it and forgot to check. It is overfilled and the spa electronics pump? keeps going on and off and on and off. We turned off the main switch at the circuit breaker and bailed out the water to a reasonable level. Will it dry out and begin working again or have we ruined it? What to do ? What to Do? Help! steph Quote Link to comment Share on other sites More sharing options...
ed3553 Posted November 6, 2010 Report Share Posted November 6, 2010 More than likely you will be fine. Leave the breaker off for the spa. Open the control box and unplug the connections and blow everything off with compressed air. Depending on outside air temp I would leave it for a day or two then turn the breakers back on. Quote Link to comment Share on other sites More sharing options...
docsteph Posted November 7, 2010 Author Report Share Posted November 7, 2010 More than likely you will be fine. Leave the breaker off for the spa. Open the control box and unplug the connections and blow everything off with compressed air. Depending on outside air temp I would leave it for a day or two then turn the breakers back on. Aloha again: Mahalo (thank you) for the advice. That is what we did right away. And today it seems to be working. Wonderful.......Thank you for your reassurance on this major glitch. Steph Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.