crager3 Posted June 26, 2009 Report Share Posted June 26, 2009 I have a 1990 Hot Springs Classic that has been turning it's heater off for awhile now. I bought a new thermostat and want to install it. The thermostat instructions talk about a DC to AC conversion, but my hot tub is plugged into a 110 wall outlet. Also, how do you get into the control box? My tub is installed in a deck so access is through the flip up door under the deck. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
JerimiahR Posted July 1, 2009 Report Share Posted July 1, 2009 The best thing to do here, would either be to contact your local Hot Spring dealer, or call Watkins Manufacturing (Hot Spring makers) @ 800-999-4688. Ask for their Tech Support. Very good support staff there at the Hot Spring's factory. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.