dpscmiller2 Posted January 10, 2009 Report Share Posted January 10, 2009 Our six month old Flair's l (her name is Pearl) lights stopped working a couple of weeks. 2020 Remote and spa display show that lights are on (+ symbol shows on both displays)We reset the breaker only to discover that now the stereo will not work. Music function on 2020 and spa display also shows + symbol. When you try to turn off - symbol will come up briefly then go back to + symbol. Dealer has sent tech out but was not able to repair. While toggling around with the remote last night one blue light at base of cool down seat came on and will not go off. Dealer suggeted it might be a bad sensor? Any ideas? By the way, when this spa is 100% it is absolutely awsesome! We love it! The lights, the music - how fun to have iPod music while relaxing. We simply love it and want to get these issues resolved asap. We don't want to waste one more "Pearlfect" cold winter night not enjoying her at 100% Quote Link to comment Share on other sites More sharing options...
East TX Spa Posted January 10, 2009 Report Share Posted January 10, 2009 The first run of Limelights had controllers with a glitch in the software. The dealer simply needs to replace the controller and all should be good. They are really neat spas. We've sold a bunch of them.....and replaced a bunch of controllers. All is good now. Glad you like the spa! Terminator Quote Link to comment Share on other sites More sharing options...
mboyenko Posted October 27, 2010 Report Share Posted October 27, 2010 The first run of Limelights had controllers with a glitch in the software. The dealer simply needs to replace the controller and all should be good. They are really neat spas. We've sold a bunch of them.....and replaced a bunch of controllers. All is good now. Glad you like the spa! Terminator When I filled my tub up last night (it was empty for the summer) most of the lights were working, with the exception of 3 lights. 2 of these 3 lights would not come on and the third would be a different color then the rest of them...i.e. if all of the lights were blue the one light would be green. As well when I turned the lights off, the one that was the different color would stay on. Now one day after filling the tub none of the lights turn on. Does this sound like a controller problem? Is the part number of the controller 1178301-10? Thanks, Michael Quote Link to comment Share on other sites More sharing options...
ed3553 Posted October 27, 2010 Report Share Posted October 27, 2010 Sounds like you have some old bulbs. The original bulbs would allow water in to the socket. This would cause them not to work. If they are the old style bulbs they need to be removed the socket dried out (blown out with air) and the new style installed. How old is your spa btw. Quote Link to comment Share on other sites More sharing options...
mboyenko Posted October 28, 2010 Report Share Posted October 28, 2010 Sounds like you have some old bulbs. The original bulbs would allow water in to the socket. This would cause them not to work. If they are the old style bulbs they need to be removed the socket dried out (blown out with air) and the new style installed. How old is your spa btw. The spa was manufactured 2nd qtr 2009...are the bulvbs easy to replace? Is there a special tool required to remove the bulbs? Quote Link to comment Share on other sites More sharing options...
armyguy Posted April 14, 2011 Report Share Posted April 14, 2011 Did either of you happen to figure out the problem?? I am having the same problem with my lights. I put the new updated controller in and still no lights are working... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.