wsroufe Posted January 31, 2008 Report Share Posted January 31, 2008 I just bought a CalSpa Eliminator Series. Light doesn't work. Any ideas? Also, any ideas on a location of a manual for the Eliminator Series. Quote Link to comment Share on other sites More sharing options...
Dr. Spa Posted January 31, 2008 Report Share Posted January 31, 2008 ahhhhhhhhhh, calspas.com ? http://www.calspas.com/manuals/ goes back to 1985 Quote Link to comment Share on other sites More sharing options...
Pathfinder Posted January 31, 2008 Report Share Posted January 31, 2008 Maybe check to see if the light bulb is burnt out?? I dont believe there is an Eliminator series. Calspa has Eliminator wet ends on the pumps. Quote Link to comment Share on other sites More sharing options...
wsroufe Posted February 1, 2008 Author Report Share Posted February 1, 2008 Yes, I went to Calspa.com, but nothing looks very specific. As far as the light is concerned. I didn't know if it just popped out or whether there was a special way to change it - I don't want to get electrocuted, but I guess there is sometype of fault to prevent that. Quote Link to comment Share on other sites More sharing options...
Pathfinder Posted February 1, 2008 Report Share Posted February 1, 2008 To check your light, open your equipment panel. You will see the white housing with thin black and white wires running to a black plastic piece. Give the black piece a half turn, you can then pull the light assembly out with the bulb to see if it is burnt out. Quote Link to comment Share on other sites More sharing options...
Pathfinder Posted February 1, 2008 Report Share Posted February 1, 2008 I forgot to ask is your control digital or air button. If it is air button check to make sure all your tubes are connected. Quote Link to comment Share on other sites More sharing options...
wsroufe Posted February 1, 2008 Author Report Share Posted February 1, 2008 It's manual buttons. I can see light assembly from control side, seems to be attached to a big tube - do you mean pull from inside spa or control side. All tube seems to be attached. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.