Murdo Posted October 1, 2021 Report Share Posted October 1, 2021 An issue popped up that perhaps you might be able to offer advice on. I think in moving the pipes to remove the pump I dislodge the intake flange in the tub. I took it apart and cleaned it as best as possible. The gasket seems to be good, not brittle etc. I am wondering what the best reassembly method would be. Should there be any glue or sealant between the gasket and tub? It looked like there was something there but it could also have been calcium build up from the hard water I have here. Also there looked like there was some kind of putty in the thread of the flange and silicone sealant between the flange and inside of the tub. Should I add some sealant to the threads? Would teflon tape work? Should I add silicone between flange and inside of the tub? Quote Link to comment Share on other sites More sharing options...
Cusser Posted October 1, 2021 Report Share Posted October 1, 2021 Soaking in vinegar or vinegar-soaked rag can remove water deposits. I wouldn't use any "sealer" on the threads, the seal is made by the gasket. A little RTV or Permatex Aviation on the gasket surfaces might help. Quote Link to comment Share on other sites More sharing options...
Murdo Posted October 1, 2021 Author Report Share Posted October 1, 2021 Thanks for the reply. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.