NewToTubbin Posted April 19, 2021 Report Share Posted April 19, 2021 Hey guys! Just got finished redoing an older 1998 hot spring sovereign. Redid the iq2020 board and control head along with the aux panel. It powers up and it heated nicely. Everything on both the main and aux panels works, lights included. I can set the temp and engage the jets. The issue is that you can hear the solenoid kick in when you engage the jets and the word “jets” with the symbol shows on the display but the actual jets won’t fire. Basically the control head thinks it’s sending signal to them but it’s not engaging. No airlock. Did I just tighten the screws too much or is the pump in need of replacement? Any thoughts? Thanks I’m advance Quote Link to comment Share on other sites More sharing options...
RDspaguy Posted April 21, 2021 Report Share Posted April 21, 2021 Post a picture of the circuit board, wiring diagram, and breakers with wiring visible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.