Tristan Posted October 10, 2017 Report Share Posted October 10, 2017 Hey all, I recently picked up a Nordic Spas Escape hot tub (to replace an older smaller spa I had). They guy I got it from had said it worked but had an error code. I wired it in 220v, but nothing is coming on, I put the jumpers in the correct position for 220v. It has 3 jumpers the top being HC (for 220) middle being F vs C and the third being 1 pump or 2. The third one is missing... not sure that that matters. There are no indicator lights on in the control panel box and no lights on the topside control panel. I know there is power at the wires connected to the spa. I hate to just start shotgun replacing parts, not really knowing the history of the tub... I would have thought that it is just a faulty topside panel but there are no lights on in the control box... It is not tripping the breaker that is wired to. any help is appreciated. Quote Link to comment Share on other sites More sharing options...
danthespaman316 Posted October 12, 2017 Report Share Posted October 12, 2017 If it's a GFCI breaker at your quick disconnect make sure the neutral is wired to the breaker and not the bar. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.