davecason Posted October 13, 2015 Report Share Posted October 13, 2015 HI Folks, For some reason on my COAST spa the circulation pump (pump1) seems to now be on a 24 hr cycle. I have no idea why, it was fine but something has changed. I've been keeping an eye on it and it seems to no longer shut down at all !! To try to re-set it I have powered it down and turned it off for 5 mins, Then pwered it back up and watched the numbers cycle thru till Pr ( Prime) shows up. It's a balboa control system with their 500SZ Series type of cpntrol head so I have gone thru and pressed: the Temp UP/DOWN buttons then pressed PUMP 1and set it to display FIL4 and then pressed PUMP 1 again to program the cycle. Right now it's set to 93 deg on "Econ" mode for running ...... What elce can I do to test / fix it? Cheers' Dave Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted October 13, 2015 Report Share Posted October 13, 2015 Try hitting the temp button, then pump/Jets1 button in less than one second. You should see the letter F, followed by a number; 2, 4, 6, 8, or FC. Hit the temp button until you see F2. hit the pump button one last time. That will do it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.