jbugno Posted November 1, 2012 Report Share Posted November 1, 2012 Hi. First time poster, first time spa purchaser. I was wondering if someone with a Jacuzzi J300 or maybe even J400 series spa could help me with a dimension I need. The spa has composite sides and an ABS bottom pan. The bottom pan is in-set from the sides. If you were to take a level and hold it flush with the side of the spa and then measure horizontally from there to where the pan is in contact with the ground what would that dimension be? From pictures I estimate to be around 3"-6" but it is hard to tell from internet pictures. Thanks, Jake Quote Link to comment Share on other sites More sharing options...
Orion6192 Posted November 2, 2012 Report Share Posted November 2, 2012 I have a J345. The pan, just guessing from reaching down the side, sets in 3" max. I'll pull a dim tomorrow. Quote Link to comment Share on other sites More sharing options...
TdiDave Posted November 3, 2012 Report Share Posted November 3, 2012 I have a 480 coming in a few weeks and was just thinking about the same measurement. What would the pan dimensions be in relation to the overal dimensions listed in the spec sheet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.