Mebobin Posted May 15, 2012 Report Share Posted May 15, 2012 Hi Why when I turn the mains on to my Balboa Sf100 Hot Tub do I only have 5 seconds to press the jets 1 button otherwise, the circualtion pump dosent kick in and I get the error Message FLO????, My Mains switch is in the front of my house and the jacuzzi is 100m down the back of the garden, Im going to have a heart attack if I have to keep up with the chase. Any help please Quote Link to comment Share on other sites More sharing options...
countspacula Posted May 20, 2012 Report Share Posted May 20, 2012 this system should turn the pump on if heat is called for, by itself. Sounds like you may have lost low spedd for some reason, if you are handy with an ampmeter, you can diagnose, turn off breaker, unplug the pump, turn on breaker, hit the temp up button and wait for the "click", check the pins on the board to verify that voltage is actually going to the pump, if it isnt, then likey the realy is bad, if you do have voltage, then something is wrong at the pump most likely. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.