Hot-Tubby Posted February 20, 2012 Report Share Posted February 20, 2012 Have a 1996 Saratoga with a Balboa control. Just replaced the little circulator pump (it failed) and have a new low flow heater on order (old one rusting through and it drips from the lower seam). But the time it runs the jets each day gets earlier by about an hour or so. I'm hoping there's something I can do besides replace the computer board! It's a DU-SAR100-CCA balboa computer board Thanks Quote Link to comment Share on other sites More sharing options...
Kenny W Posted February 21, 2012 Report Share Posted February 21, 2012 I am guessing you mean when the pumps turn on for a filter cycle? As long if it not going beyond the filter setting you are good. Example if if it has a 2 hour filter cycle and runs twice a day as long as it only runs for them 2 hours each no matter if it starting earlier each day don't worry about, So the chip can't calculate time anymore. Now if it starting a hour earlier and running longer, this will increase operating costs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.