scott Bradley Posted January 15, 2012 Report Share Posted January 15, 2012 Just got a hot tub and not sure if its heating. BEEN A HR AND THE TEMP HAS NOT CHANGED. iT IS COLD OUT BUT i STILL THK THE TEMP SHOULD BE GOING UP SOME. SHOULD IT BE IN STANDARD MODE OR ECONOMY MODE? Quote Link to comment Share on other sites More sharing options...
packfan Posted January 15, 2012 Report Share Posted January 15, 2012 How cold is it? I filled mine at 40 degrees out, water was about 50 and I gained 3 to 4 degrees an hour. Quote Link to comment Share on other sites More sharing options...
countspacula Posted January 15, 2012 Report Share Posted January 15, 2012 How cold is it? I filled mine at 40 degrees out, water was about 50 and I gained 3 to 4 degrees an hour. put it in standard mode and leave it there. May take over an hour to show temp difference, then 2 - 5 degrees an hour. Quote Link to comment Share on other sites More sharing options...
scott Bradley Posted January 15, 2012 Author Report Share Posted January 15, 2012 It has been on for hours and doesn't seem like it is warming? Quote Link to comment Share on other sites More sharing options...
PreservedSwine Posted January 16, 2012 Report Share Posted January 16, 2012 Two quick questions... Is it wired 110v, or 220v? Does it have a cover in place? Properly covered, on 110v, it will gain about 2 degrees/hr. With no cover- it will not heat at all, or lose heat. On 220v properly covered, it will gain 5-8 degrees/hr. With no cover, only a couple degrees per hour, or not at all. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.dc5a6170fa916412670749ff27e20047.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.