drtumolo Posted November 2, 2011 Report Share Posted November 2, 2011 Could someone help with identifying the bearings needed for my spa's motor. It is a Strong built spa with the following motor. Emerson Motor 5.0 hp 2 speed Model Number R63MWDNE 200 Frame 56y I can not find this motor listed anywhere let alone what bearings are needed to repair. I am trying to avoid pulling the motor apart only to identify bearings. The motor still runs but is very noisy and with temps droping below freezing I dont want the spa turned off over night why I wait for bearings to be shipped. Quote Link to comment Share on other sites More sharing options...
Spa_Guru Posted November 2, 2011 Report Share Posted November 2, 2011 http://www.poolspaforum.com/forum/index.php?showtopic=33740 Check that thread, you should have the same bearings, 6203 double seal. Quote Link to comment Share on other sites More sharing options...
drtumolo Posted November 3, 2011 Author Report Share Posted November 3, 2011 would you know what the id is of my motor bearings? I really want to order the bearings before I tear it down. It has been dropping below freezing at night and I am afraid to let the spa sit without heat. Quote Link to comment Share on other sites More sharing options...
Spa_Guru Posted November 4, 2011 Report Share Posted November 4, 2011 11/16th inch or .6875 in Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.