wbmjr Posted June 25, 2010 Report Share Posted June 25, 2010 We are installing the Intex SaltWater system. I put the salt in for 24 hours to disolve. I have to run the PUMP ONLY without the Chorinator for 24 Hrs. I started the pump and immeadiately shut it down. There appeared to be very cloudy water coming into the pool? This is 18' X 48" above ground pool / 26" Baquapure,2.5 H.P. 2 speed pump. The pool had been emptied since the water was very green. Should we try to fill the ball or back wash the pump? Any help will be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
DJones Posted July 22, 2010 Report Share Posted July 22, 2010 We are installing the Intex SaltWater system. I put the salt in for 24 hours to disolve. I have to run the PUMP ONLY without the Chorinator for 24 Hrs. I started the pump and immeadiately shut it down. There appeared to be very cloudy water coming into the pool? This is 18' X 48" above ground pool / 26" Baquapure,2.5 H.P. 2 speed pump. The pool had been emptied since the water was very green. Should we try to fill the ball or back wash the pump? Any help will be greatly appreciated! Did you fix your problem? I have a similar issue with cloudy water and a sand filter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.