Tanker0506 Posted October 16, 2009 Report Share Posted October 16, 2009 I recently had an older emerald spa given to me and I got it up and running after fixing some leaks and replacing the heater. One problem I found was I can't figure out how to get the backlighting for the 8 button balboa control to turn on. Should it just come up when u push a button or what. Right now I am using a flash light. Quote Link to comment Share on other sites More sharing options...
lkneisler Posted October 16, 2009 Report Share Posted October 16, 2009 I recently had an older emerald spa given to me and I got it up and running after fixing some leaks and replacing the heater. One problem I found was I can't figure out how to get the backlighting for the 8 button balboa control to turn on. Should it just come up when u push a button or what. Right now I am using a flash light. On some of the balboa top sides there is a backlight bulb that can be replaced. You have to pry the top side up from the spa and it's on the back side. Gray or black round thing that unscrews a little bit - that's the bulb. Quote Link to comment Share on other sites More sharing options...
Tanker0506 Posted October 16, 2009 Author Report Share Posted October 16, 2009 Thanks for the info ill give that a shot tonight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.