Jump to content

Cyanuric Acid Test


Recommended Posts

Once you get used to doing the cyanuric acid test, here is a way to do the test that will use less reagent.

01) Fill the comparator tube to the 4.5 ml line with pool water.

02) Add cyanuric acid reagent to the 9 ml line.

03) Cap and mix for 30 seconds.

04) Look into the tube to see if the dot is visible.

05) If the dot is not visible, shake out a little bit of water and look again.

06) Continue until dot is visible.

This way uses only 4.5 ml of reagent versus 7 ml of reagent. The Taylor test kit comes with 44.36 ml of reagent. Using 7 ml, you can do 6.337 tests. Using 4.5 ml, you can do 9.857 tests.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...