Jhnee1 Posted August 10, 2009 Report Share Posted August 10, 2009 Arctic Spa (Tub) was turned off but left full water for a few weeks then I drained it and fixed a leak. I filled the tub and turned it on and now have a flo error. Spa has only one pump and is 5.5 years old average use is once a week by my wife. Now pump won’t come on to heat water. Spa worked fine prior to that except for leak. Checked there are no obstructions, all main valves are open, filter is new and I even removed filter to see if that would work. I have also turned power on and off at breaker a few times. Every now and then pump tries to start and I can hear a hum for a few seconds then it shuts down. Any thoughts how to fix. Quote Link to comment Share on other sites More sharing options...
ttrublue Posted August 10, 2009 Report Share Posted August 10, 2009 Sounds like pump is seized, my guess anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.