spapleasure Posted February 21, 2009 Report Share Posted February 21, 2009 I have a 2001 Sundance Altamar 850 that one of the main relays cuts off 3 seconds after power on (K4,K5 or K6). It had been making what I thought was bearing noise from the circ pump for a few days, now no heat or circulation. I've pulled one leg of the circ pump, both hi and low of the main, heater, O2, and light, with no effect. The panel shows intitally 107 deg (it's low 30's today) and then shows ------ Any suggestions? Thanks. Quote Link to comment Share on other sites More sharing options...
therooster Posted February 25, 2009 Report Share Posted February 25, 2009 98% it is your temp sensor. They are cheap and fairly easy to install. Quote Link to comment Share on other sites More sharing options...
spapleasure Posted March 1, 2009 Author Report Share Posted March 1, 2009 That was just the ticket. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.