Hydro Spa 510 Filter Housing

[tmacdonald]

Hello Everyone:

I inherited (not by choice) a hydrospa 510 model spa. It is a late 2003 or early 2004 model. My problem is that I do not have the "Top End" to the filter housing. I believe it may be some type of skimmer but I have no idea as this is my first encounter with a spa.

Most of the other components are marked as Waterway brand. Have looked all over the filter housing and can not find a part number anywhere, although I am proud to say that I identified the "Made in China" sticker.

Filter # is 817-3501.

It has some type of "locking" mechanism on the tub side of the housing.

Any replies would be greatly appreciated and I can post more info if need be.

Thanks again,

Todd

[ps558]

Hello Everyone:

I inherited (not by choice) a hydrospa 510 model spa. It is a late 2003 or early 2004 model. My problem is that I do not have the "Top End" to the filter housing. I believe it may be some type of skimmer but I have no idea as this is my first encounter with a spa.

Most of the other components are marked as Waterway brand. Have looked all over the filter housing and can not find a part number anywhere, although I am proud to say that I identified the "Made in China" sticker.

Filter # is 817-3501.

It has some type of "locking" mechanism on the tub side of the housing.

Any replies would be greatly appreciated and I can post more info if need be.

Thanks again,

Todd

Well it most likely is made bt waterways too. Either a Top mount were the filter goes in the top from the shell or were the entire assembly is inside the spa cabinet.

This link has a parts break down I hope it comes up without a login.

http://www.horizonparts.net/store/main.asp...tem=16-270-W005

[ALASKA RECREATIONAL]

Why don't you call HYDROSPA parts at 1-877-best spa that where I get all our HYDROSPA parts. Tell them you were refered by the HYDROSPA repairman in Washington State.