mgdad Posted July 3, 2007 Report Share Posted July 3, 2007 I plan to build a deck around my new Sundance Optima 880. I am told I should incorporate a cutout section of the deck that can be removed for access to equipment etc. Has anyone done this before and if so, can they recommend dimensions of cutout section. Many thanks! Quote Link to comment Share on other sites More sharing options...
wwillie Posted July 3, 2007 Report Share Posted July 3, 2007 I built a deck around my sundance ultima and made it @ 2' deep and the width of the tub. Still not alot of room but it worked. Built it in 2 sections so it was easier to handle and not so heavy. Quote Link to comment Share on other sites More sharing options...
spjordan Posted July 9, 2007 Report Share Posted July 9, 2007 I recently had a deck built around my Sundance Altimar, and the contractor left almost 18 inches all the way around the spa. Then they built a step that covered the opening. Now if I need access, all I need to do is slide the steps away. It looks very professional, and is very functional. Quote Link to comment Share on other sites More sharing options...
egbert Posted July 9, 2007 Report Share Posted July 9, 2007 My deck builder had the hatch 30" deep and the width of the tube. It is also in two sections to make it easier (lighter) to remove. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.