azmedic Posted January 14, 2006 Report Share Posted January 14, 2006 I was just given a coleman spa 204 B Manufactured in 1997. I can't find any literature on it. Do you know the gallon size for chemicals or know where to look. Thanks, Kevin Quote Link to comment Share on other sites More sharing options...
mommym Posted January 14, 2006 Report Share Posted January 14, 2006 This might be a really dumb question but did you look on Coleman's web site? I went there just out of curiousity and under owner's manuals there were spa manuals that go back to the 1980's. A friendly Coleman dealer may be able to help you ,too. Also, there must be some mathematical formula to take into account both tub diameter and depth to give you total gallons. Good luck and hopefully you'll be soaking soon. I almost forgot...At our house we can actually read the gallons used on our water meter. Don't know if that's possible at your house. You could just fill 'er up and do the math. Quote Link to comment Share on other sites More sharing options...
Brulan1 Posted February 2, 2006 Report Share Posted February 2, 2006 This might be a really dumb question but did you look on Coleman's web site? I went there just out of curiousity and under owner's manuals there were spa manuals that go back to the 1980's. A friendly Coleman dealer may be able to help you ,too. Also, there must be some mathematical formula to take into account both tub diameter and depth to give you total gallons. Good luck and hopefully you'll be soaking soon. I almost forgot...At our house we can actually read the gallons used on our water meter. Don't know if that's possible at your house. You could just fill 'er up and do the math. The amount of gallons on a 204 spectrum is 126 gallons. Do you use bromide? If so, than I can recommend using a different system Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.