Pof Posted February 14, 2024 Report Posted February 14, 2024 Hello! When i turn on my maax spa, the high speed is running automatically when the spa is in PR mode…so i unplug the utra violet ozonator or sonething like that and the problem was solved for fews months…but it came back this week end. I don’t know what can cause this… all the top side controle works, pump 2 is ok and lights are ok. But pump 1 cannot run in slow mode…the spa try to start the slow speed but the pump run like 0.1 sec and it stop… is it a board issue? thank you!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.