Sandj13 Posted January 28, 2019 Report Share Posted January 28, 2019 Hello all, and thank you in advance for taking time to help out. I am going to post my pool guys text to me below, but before I do a little background: built in 2012 30,000 gallon salt Jandy Aqualink equipment Jandy Lrz heater Goodmorning, it will probably be beneficial to call Jandy¿ 800-822-7933 for a service tech that specialize in legacy heaters. You can let them know fusible link was replaced after first error, next we got a high limit error, we installed new limit switch and harness. Limit switch was corroded in outside port and feels like there is obstruction when putting in new switch. Hopefully it will be a simple fix, I just dont see many older heaters and would hate to go part by part to diagnose. I am sorry that I couldn't be more help on this heater. Any ideas or suggestions on a fix? Thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.