xenon2000 Posted June 8, 2017 Report Share Posted June 8, 2017 I have watch a handful of videos and run across many posts about taking the slide valve out of the housing of the backwash valve. Even ones that look really stuck. But in the end they just keep wiggling and pulling and get it out. But I just can't remove mine. It only goes up a little bit, doesn't wiggle side to side at all. And no matter how hard I pull or even if I push down and then pull up as fast as I can, it never moves more that what seems like the usual distance of normal operation. Is there some kind of slide hammer tool I can use? Some trick I am missing? I really don't want to cut and re pipe in an all new assembly. Quote Link to comment Share on other sites More sharing options...
xenon2000 Posted September 18, 2018 Author Report Share Posted September 18, 2018 I gave up and had a company come out and replace the O-ring. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.