Shempinator Posted December 21, 2014 Report Share Posted December 21, 2014 Hello, I have a Sundance spa with no heat. The flow switch is Part # 6065-852. Was wondering if it's ok to jump the leads together to see if the heat comes on and the switch is bad. The switch is 12 years old. Also. I have 0 continuity on the leads when water flows and 0 continuity with no flow. Thanks for your help in advance... Quote Link to comment Share on other sites More sharing options...
Dr. Spa Posted December 21, 2014 Report Share Posted December 21, 2014 I have 0 continuity on the leads when water flows and 0 continuity with no flow. ... Assuming you have proper water flow and have done this correctly, you just diagnosed a bad pressure switch (or mis-adjusted). Quote Link to comment Share on other sites More sharing options...
Shempinator Posted December 21, 2014 Author Report Share Posted December 21, 2014 OK Thanks. Is it ok to Jump the two wires to see if heat comes on? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.